Special Packaging Injection Molding Machine

Introduction

lisong has been developing high-speed injection moulding machines,and we have delivered hundreds of high-speed injection moulding machines and nearly 1000 sets of thin-wall injection moulds, and nearly 80 thin-walled items injection moulding production li

Advantages

Accurate temperature control

Standard infrared Nano heating ring, fast heating, good heat preservation performance, energy saving over 30%, closed-loop PID temperature control, precise temperature control, excellent process control stability.

With large L/D ratio, low shear, high temperature refinement optimization screw, good mixing effect, good plasticizing effect.
Precision injection molding

The injection table supports high-precision double linear guides,low friction coefficient, injection and plasticization resistance are small and uniform, and faster injection speed, which is suitable for precise injection molding

Medium-inertia non-rotating single-cylinder injection molding machine, with compact structure, fast injection start speed, high repeat accuracy, and the maximum shooting speed to be 1000mm/s.
New Servo Motor

Built-in multi-group servo oil circuit power and control system, the oil pump runs at a constant temperature in the oil tank for a long time, the life of the oil pump is longer, and the machine noise is lower.

The opening and closing of the mold can be synchronized to sol, and the opening and closing of the mold can be simultaneously ejected or core-pulled, so as to minimize the molding cycle and improve the production efficiency.

The unique modular design can be disassembled and repaired from the front.
KEBA advanced control interface

High-speed microprocessor continuous action mode scan cycle up to 1ms Ergonomic layout

With injection speed and pressure control curve tracking function Self-diagnosis and fault detection capabilities

Parameter

Lisong Injection Technology Co.,Ltd.	LS 170/470G	LS 220/530G	LS 268/580G	LS 300/630G	LS 320/670G	LS 400/730G	LS 450/780G	LS 500/830G
Model descriptin	170/470-600	220/530-600	268/580-655	300/630-800	320/670-1000	400/730-1000	450/780-1600	500/830-1600
Intemational size desription	1700-600	2200-600	2680-655	3000-800	3200-1000	4000-1000	4500-1600	5000-1600
Clamping unit	170/470G	220/530G	268/580G	300/630G	320/670G	400/730G	450/780G	500/830G
Clamping force[KN]	1700	2200	2680	3000	3200	4000	4500	5000
Locking force[NI]	1870	2420	2948	3300	3520	4400	4950	5500
Max mould opening stroke[mm]	430	500	550	640	690	750	750	820
Min.mould height[mm]	180	200	220	250	250	280	300	300
Max mould height[mm]	520	550	580	610	680	730	800	850
Max daylight[mm]	950	1050	1130	1250	1370	1480	1550	1670
Template size (horizontal x vertical)[mm]	745x655	800x800	875x875	940x900	1000x970	1090x1090	1140x1090	1230x1150
Tie rod spacing (horizontal x vertical)[mm]	470x410	530x470	580x520	630x590	670x640	730x730	780x730	830x750
Ejetion stroke[mm]	140	140	140	140	140	140	140	180
Eection force[KN]	67	67	88	88	88	88	88	130
Injection unit	600	600	655	800	1000	1000	1600	1600
Screw diameter[mm]	45	45	50	55	58	58	60	60
Screw geometry	standard	standard	standard	standard	standard	standard	standard	standard
L/D ratio	22	22	22	22	22	22	22	22
Injection pressure (to 400C)[barn]	1738	1738	1752	1655	1707	1707	1599	1599
Max. qylinder head volume[cm]	366	366	452	546	608	608	933	933
Max shot weight (PS)[g]	333	333	411	497	553	553	849	849
Max. Rate of injection'
without acumulator[cm³/s]	528	528	750	908	1057	1067	1312	1312
Add accumulator[cm³/s]			1198	1449	1612	1612	1725	1725
Injection speed[NI] (Under 100r ijncin resure.)
without acumulator[mm/s]	332	332	382	382	400	404	464	464
Add accumulator[cm³/s]			610	610	610	610	610	610
Plasticization rate
Max screw stroke[mm]	230	230	230	230	230	230	230	230
Max nozzle dpping depth(SVO)[mm]	50	50	50	50	50	50	50	50
Nozzle sealing force[KN]	80	80	80	80	110	110	110	110
Number of heating zones	4	4	4	5	5	5	5	5
Hopper capacity[Ltr]	35	35	50	50	70	70	110	110
General data	170/470-600	220/530-600	268/580-655	300/630-800	320/670-1000	400/730-1000	450/780-1600	500/830-1600
Oil tank capaty[Ltr]	320	420	520	520	650	690	690	720
Installed electrical rating
pump[≈KW]	53.4	53.4	72	87.4	119.4	132	148	148
heating capacity of screw clinder[≈KW]	16.3	16.3	19.8	21.1	23.5	23.5	26.5	26.5
capacity with electr drive[KW]	70	70	92	108	143	155	174	174
Net weight (without o)[≈Kg]	5700	7600	10100	12500	13800	17500	18900	20000
Machine dimensions(XxWX h)[≈m]	5.2x1.4x1.85	5.9x1.5x1.85	6.6x1.63x2.15	6.9x1.75x2.2	7.45x1.82x2.26	7.7x1.91x2.26	8.0x1.93x2.3	8.2x1.95x2.3

Cases

Solutions

Recommend News

450 ton Automatic Plastic Injection Moulding Machine for making C

We can provide customers with plastic barrels of various specifications and uses, including plastic barrels in different fields such as food grade, chemical grade, and medical grade. ...

Send samples

If you need, you can send samples to open the mold
Get detailed address
Customized solutions

Customized production line, meet your needs
Order
Book a visit

Make an appointment in advance and we will serve you wholeheartedly.
Book